»Pin description,

»Instruction set,

»Program counter and ROM space,

» In-line assembly programming using cross compilers,

» Data types and directives,

»Flag bits and PSW register,

» Register banks and stacks,

» Loop, jump, call, delay generation, I/O programming,

» Addressing modes for memory access,

» Arithmetic instructions, Logical instructions, Single bit instructions,

» Timer and counter programming, Timer interrupts

» Creating work environment. DIR, ASM, DATA, UART, UTIL, LCD KEYS

» Program for LED ON/OFF, Blinking, Delay, Intensity control using PWM

» Building segment LUT, Display 0, 1, 2…9, A,B…F, Multiplexing displays

» Interrupts: Display and increment count on interrupt (manual & delay based), multiplexing    through ISR counting 0000, 0001…..9999.

» Keyboard scanning: Debouncing, key_ready, key_value, displaying key pressed on
    seven - segment display.

» Integrating keyboards and display through ISR.

» Stop watch implementation

» LCD : Initialize LCD and Display cursor, writing ASCII set to cursor, blink messages

» Alarm keys : Implementing UP, DOWN, ALARM OFF and ALARM set keys, adding time out to   these programs

» UART: Initialize UART, Transmit Character to V term, Transmit messages, trace routines for    debugging.

» Serial port based command processing

» Programs for reading / writing byte, block, flag bits